COVID-19 Update: We are open and ready to service your needs as an essential business and complying with recommendations of the CDC and local heath departments.

Engineered Systems

Abrasive Removal

Pumps & Systems “Severe Duty” Abrasive Removal System is the most robust / heavy duty system available in the waterjet cutting industry and is designed for the “production” waterjet cutting environment. A rubber coated, vertical, seal less pump, pulls the abrasive laden water through an over sized suction strainer basket, then pumps it in to the heavy duty centrifugal separator. The spent abrasive is then purged into a #4400 bag hopper. The clean return from the separator feeds the agitation package in the waterjet catch tank.

System Features

  • Over sized strainer with Stainless Steel basket
  • Rubber-coated seal-less vertical pump
  • Heavy duty removable dome centrifugal separator
  • 4400# bag hopper
  • Engineered tank agitation system/educator package
  • Air operated maintenance pump

System Options

  • Central systems from multiple machines
  • Redundant strainers for underlay applications
  • 2 & 3 year warranties available
  • Digital abrasive scale bags
  • Air injection for increased agitation

Booster

Pumps & Systems pressure boosting solutions are the optimal choice for commercial building, water supply, industry, and irrigation applications. Our complete packaged systems provide consistent, reliable and efficient pressure boosting to meet capacity requirements for your application.

System Features

  • VFD Controller standard
  • Suction / Discharge pressure monitoring
  • Great for boosting city water pressure
  • Programmable alarm for high / low pressure
  • System Features

System Options

  • Different pumps available based on flow rate and pressure
  • Remote system control available
  • Silence alarms remotely
  • Inline flow monitors
  • Standby pumps option

Waterjet Chiller

The Pumps & Systems Waterjet chiller is used to cool the hydraulics on the intensifier pump, dissipation for the direct drive feed water and reduces water consumption up to 75%. We have engineered chillers for both the Water Recycling and Reverse Osmosis systems. All chillers exceed OEM BTU specs for cooling. The Digital Controller will set off an alarm if certain parameters for flow and pressure are not met.

System Features

  • Digital controller alarm
  • Liquid pressure gauge
  • Stainless Steel Vertical multi-stage pumps
  • Cleanable air inlet filters
  • Phase protected condensers

System options

  • Remote / External heat exchange
  • Glycol Pails / Drums
  • Central Chiller

De-ionize Cart

Pumps & systems DI Cart makes it possible to filter hard water at any location due to its size and ease of portability. All machining processes that use water require highly filtered / pure water to perform optimal levels. Our DI cart systems use fiberglass exchange tanks or stainless steel “bag” media vessels.

System Features

  • Settling Weir Pre-Filer
  • Bag / Cartridge filters for suspended solids
  • DI resin for TDS / Dissolved solids
  • Ozone generator for bacteria control
  • Chiller for temperature control
  • One micron absolute final filter
  • Filter service, resin, & low water alarms

System Options

Reverse Osmosis make up water system Redundant filter vessels for production waterjet cutting Central system for multiple pumps / machines Central chiller for multiple pumps / machines Pump-back systems

Grinding Filtration

The Pumps & Systems Grinding System eliminates downtime and loss of production for sump cleaning. The clean coolant will extend wheel life and reduce wheel dressing. Dual sludge receivers for uninterrupted filtration during filter service. The Grinding System will reduce coolant consumption and disposal as well as help reduce rejected parts.

System Features

  • Utilizes a Centrifugal Separator
  • Stainless Steel 1/8″ perforated inlet strainer
  • Heavy duty vertical seal-less filter and flush pump
  • Carbon steel sludge receivers
  • Start / Stop controls with filter service light

System Options

  • Chiller for temperature control
  • Polishing filter
  • Sludge receiver options: Bag hopper, Self dumping hopper & 55 Gallon drum

Reverse Osmosis

The Pumps & Systems Reverse Osmosis System is used as make up water for the Water Recycling Systems or as the primary cutting water feed. Reverse Osmosis Systems lower the operating cost of running a WRS by almost 50% by providing DI quality water at a fraction of the price per gallon.

System Options

  • Water softner
  • Carbon pre-filter
  • 5 Micron sediment pre-filter
  • Stainless Steel booster pump
  • RO Permeate tank
  • Re-pressurization system
  • Digital TDS / Temperature meter

System Features

Added capacity to treat other plant processes that require treated water Multiple feed pumps depending on flow / pressure required De-ionization polishing filter for ultra pure applications Larger capacity RO permeate tanks

Water Reclamation

The Pumps & Systems Water Recycling System completely reuses all cutting and cooling water. The Water Recycling System addresses the four critical areas of water recycling: Suspended Solids, Dissolved Solids, Temperature and Organic Fouling. The Water Recycling System can be adjusted to send any Waterjet pump OEM’s specifications for the water quality and water temperature back to the HP Pump.

System Options

  • Settling Weir pre-filter
  • Bag / Cartridge filters for suspended solids
  • DI resin for TDS / Dissolved solids
  • Ozone generator for bacteria control
  • Chiller for temperature control
  • One micron absolute final filter
  • Filter service, resin and low water alarms

System Features

  • Reverse osmosis make up water system
  • Redundant filter vessels for production waterjet cutting
  • Central systems for multiple pumps / machines
  • Central chiller for multiple pumps / machines
  • Pumpback systems